CATEGORIES

• All
• Reactor
• Rotary Evaporator
• Freeze Dryer
• Spray Dryer
• Steam Sterilizer
• Centrifuge
• Pump
• Heating Circulator
• Chilling Circulator
• Lab Furnace
• Fume Hood
• Biological Safety Cabinet
• Clean Bench
• Incubator Shaker
• Water Distiller
• Liquid Nitrogen Tank
• Dissolution Tester
• Disintegration Tester
• Tablet Friability Tester
• Tablet Hardness Tester
• Thickness Tester
• Food Testing Instrument
• Spectrophotometer
• Atomic Absorption Spectrophotometer
• Gas Chromatography(GC)
• Gas Chromatography Mass Spectrometry(GC-MS)
• PCR Thermal Cycler
• Ultrasonic Cleaner
• Ultrasonic Cell Crusher
• Ultrasonic Disperser
• Ultrasonic Flaw Detector
• Ultrasonic Thickness Gauge
• Low Temperature Freezer
• Molecular Distillation System
• Drying Oven
• Incubator
• Centrifugal Extractor
• Nucleic Acid Extractor
• FTIR Spectrometer
• Raman Spectrometer
• Heater Chiller Circulator
• Short Path Distillation
• Filtration Equipment
• Glass Liquid Separator
• Gas Scrubber
• Microwave Digestion
• X-Ray Fluorescence Spectrometer(XRF)
• Falling Film Evaporator
• Bioreactor Fermenter
• Rotational Viscometer
• Molecular Biology Instrument
• Ultrapure Water System
• Mixers Rotators
• Petroleum Testing Equipment
• Water Analysis Instrument
• Supercritical Extraction Equipment
• Closed Loop Extractor
• Nitrogen Concentrator

Latest Products

Related Article

• What should you watch out for after sterilizing with a autoclave steam sterilizer?
  In the process of using sterilization equipment, users know that they should pay attention to many precautions. After the items are sterilized, many people may feel that they have already handled them, and they are not careful. After the equipment is finished sterilization, it is not known. We also have to pay some attention. Next, we will introduce you to what we need to pay attention to after the autoclave steam sterilizer. Through our introduction, I hope everyone can gain something.
• What should you pay attention to when using the steam sterilizer?
  The steam sterilizer is an steam sterilizer device, which belongs to a pressure vessel and is commonly used for sterilization of glassware. The general pressure reaches 0.15 kPa, and the temperature is maintained at about 120 degrees for half an hour. From heating, heat preservation and cooling. It takes two or three hours. Steam sterilizer are very common sterilization equipment. As long as they are used in microorganisms, they are basically used. They are very convenient, safe, efficient, and inexpensive. Therefore, they are widely used. There are some issues to be aware of.
• What are the types of pressure steam sterilizers?
  According to the different methods of cold air discharge, the pressure steam sterilizer is divided into two types: the lower exhaust type pressure steam sterilizer and the pre-vacuum pressure steam sterilizer.