50L Lifting Three Layer Glass Reactor 50L Lifting Three Layer Glass Reactor
50L Lifting Three Layer Glass Reactor 50L Lifting Three Layer Glass Reactor

50L Lifting Three Layer Glass Reactor

For the three-layer glass reactor, an extra layer of glass vacuum protection layer is added on the basis of the double-layer glass reactor, so as to better protect the temperature in the kettle, and at the same time, you can intuitively observe the reaction of the materials in the kettle.
  • BrandLABOAO
  • ModelLJS312-50L
  • PortAny port in China
  • PackagePlywood case package
Payment More
We also supports L/C、D/A、D/P、Western Union、MoneyGram、Discover payments for offline orders.

DESCRIPTION

The three-layer glass reactor is based on the original double-jacketed glass reactor (the inner tank is stirred for synthetic materials, and the outer jacket is used for the circulation of heating and cooling medium). Insulation layer, with this vacuum insulation layer, users do not need to worry about the waste of cold and hot resources of the second layer jacket when using the reactor to synthesize, which not only saves resources but also beautifies the appearance, users can intuitively see the inside The reaction situation of the materials in the bladder. It is convenient for users or students to record the changes in the reaction of materials in each time period, and it is more convenient for users to control the addition of materials and accessories.

FEATURES

1. It is sealed with polytetrafluoroethylene material and special rubber compound sealing ring, which can withstand various solvents and maintain high vacuum.

2. High-efficiency condenser to ensure high recovery rate.

3. The standardized connection method is very convenient for disassembly.

4. The discharging switch is installed, and the recovery of the solvent is very fast.

5. Equipped with a vacuum gauge, the best working vacuum can be selected for materials with low boiling points.

6. The whole machine adopts high-quality stainless steel, aluminum alloy and new synthetic materials, which have the advantages of corrosion resistance, rust resistance, and resistance to various solvents.

7. The glass parts are all made of GG17 high temperature resistant borosilicate glass material, which has good physical and chemical properties.

8. The electrical components are carefully selected, and the main components are all imported original parts.

9. Electronic stepless speed regulation, the motor has no sparks, is safe and reliable, and has a long life.

SPECIFICATIONS

Model

LJS312-50L

Capacity   of kettle body

50L   inner diameter  365mm middle layer  410mm outer diameter 465 inner length 576mm

Inner   mezzanine capacity

16L

Voltage   frequency

220V/50Hz

Total   power

160W

Stirring   motor power

120W

Lifting   motor power

40W

Stirring   speed

0-450rpm/   min

Temperature   range of kettle body

80~+250

Temperature   measurement accuracy

±1

Vacuum

0.098Mpa

Kettle   cover 265mm

Six   ports (full PTFE cover)

Stirring   port

Φ50mm threaded   mouth

Condensate   return port

50#Ball   mill mouth

Constant   pressure funnel mouth

40#   standard mouth

Decompression   port

34#Standard   mouth

Temperature   measurement port

24#   standard mouth

Solid   feeding port

Φ80mm threaded   port, inner diameter 50#mm

Mixer

Φ17×1000H(mm)   Leaf spread 190mm

Condenser   size

120*600H(mm)   Lower Φ60 flange mouth

Condensation   area

0.5 m2

Return   elbow

Upper   60 flange mouth left 50# ball mill plug

Constant   pressure funnel

2L Upper   29# standard port with glass stopper

Under   40# standard plug

Equipped   with 40# standard mouth×40# standard plug

S-type   adapter is connected to the kettle cover

Pressure   reducing valve

34#   standard plug valve vent nozzle (joint) outer diameter 12mm

Inner   mezzanine inlet and outlet circulation

Φ45mm flange   port supporting 6 points buffer device, external interface 4 points wire port

Outer   sandwich vacuum port

Φ35 mm flange   port supporting glass + PTFE exhaust valve

Exhaust nozzle   (joint) outer diameter 12mm

Discharge   port

Φ75mm flange   Φ33mm discharge hole Oblique discharge port (joint) Φ34mm 280mm from the   ground

Vacuum   exhaust nozzle

Joint   outer diameter 12mm

Condensing   coil in and out of circulation nozzle

Connector   outer diameter 15mm

Host   lift stroke

740mm   (Actually, the stirring rod is 50mm away from the lid of the kettle)

Dimensions   (W × D × H)

900×1000×2950mm  

Package   Size

2430×670×1130mm

Inquiry the 50L Lifting Three Layer Glass Reactor

Note:You can get a $50 coupon for online inquiry(valid for 1 month), you can use it to buy our products.

Get Factory Price in 1 Hour?